Flat Rubber Roof Columbus OH – Supreme Roofing & Exterior
Two-story home with dormers and a shingle roof

HomeRoofingFlat Rubber Roofing

Flat Rubber Roof Services Columbus OH

Installation, repair and maintenance for low-slope roofs on homes and commercial buildings.

A leaking addition or a commercial roof with recurring drainage problems needs more than a new surface. The membrane, the materials beneath it and the route water takes off the roof all matter.

Supreme Roofing & Exterior installs and services flat rubber roofing across the Columbus metro area. We work on residential roof sections, garages, additions, apartment buildings, retail spaces and offices. Whether you need a repair or are considering replacement, start with the condition of the existing roof.

Why roof slope matters when choosing a material

EPDM is a synthetic rubber roofing membrane; the initials stand for ethylene propylene diene monomer. Sheets are joined and detailed around edges, drains and penetrations to form the roof covering. It is one option for roof sections where asphalt shingles are unsuitable.

The Asphalt Roofing Manufacturers Association’s slope guidance says shingles must not be installed below 2:12. Slopes from 2:12 to below 4:12 require special application procedures. The actual slope, product instructions and applicable requirements need to be considered together.

A house can have shingles on its main roof and a membrane on a lower-slope addition. The connection between those sections belongs in the installation plan.

Rain running off a roof into the gutter

Flat rubber roof repairs and leak assessment

We provide rubber roof patching, seam resealing, flashing repairs, drain and edge repairs, and help with roof damage. New ceiling stains, visible tears, lifted seams or recurring leaks are reasons to arrange an assessment.

A localized roof repair may be suitable when the surrounding system remains sound. Repeated patching is less useful if the problem also involves wet insulation, damaged decking or drainage. A roof inspection helps establish the scope before choosing the next step.

Supreme Roofing & Exterior crew beside the company truck

Check what is beneath the existing membrane

A tidy-looking surface does not establish the condition of the layers beneath it. When planning replacement, discuss the existing roof layers, signs of moisture, insulation and deck condition. Further investigation may be needed where the visible condition leaves questions unanswered.

Our commercial flat rubber roof project near IMPACT Community Action shows why this matters. After removing the old roof, the team replaced damaged decking and installed new insulation board. The project page includes photos of that work.

The findings on your building determine its scope. For a roof replacement, clarify what will be removed, what can remain and how concealed damage will be handled. If the proposal allows an overlay, ask what evidence supports keeping the existing assembly.

Match EPDM attachment to the building

Common EPDM attachment approaches include:

  • Adhered: the membrane bonds to an approved surface using the specified adhesive system.
  • Mechanically fastened: the membrane is secured through a designed fastener and plate arrangement.
  • Ballasted: specified stone or pavers hold a loose-laid system in place, subject to structural capacity and other design requirements.

No attachment label alone establishes which roof will resist wind best. The tested assembly, roof deck, building conditions and installation details matter. Carlisle’s EPDM system specifications illustrate the different approaches. Confirm which system is suitable and available for your project.

Downspout elbow connected beneath a soffit

Include seams, drainage and roof edges in the scope

Seams matter, but so do wall connections, pipe flashings, equipment curbs, edges and drains. A leak assessment should consider these details rather than assuming every problem starts at a membrane seam.

Low-slope roofing still needs a planned route for water to leave the roof. If water repeatedly collects in one area, discuss both the outlet condition and the roof’s drainage layout. New membrane alone should not be treated as a correction for every drainage problem.

Before agreeing to roof installation, confirm the membrane product and thickness, attachment, insulation, flashing, drainage work and warranty terms included. Ask how weather protection, access and any rooftop equipment will be handled during the work.

Service area

Flat roof services across the Columbus metro

We serve Columbus and surrounding communities including Upper Arlington, Grove City, Westerville, Reynoldsburg, Dublin, Hilliard, Gahanna and New Albany. See the service area page for more locations. Share your address and whether the roof covers a home, addition or commercial building.

  • Columbus
  • Upper Arlington
  • Grove City
  • Westerville
  • Reynoldsburg
  • Dublin
  • Hilliard
  • Gahanna
  • New Albany

FAQ

Questions about flat rubber roofing

Is EPDM the same material as TPO?

No. EPDM is synthetic rubber; TPO, or thermoplastic polyolefin, is a different membrane material. EPDM seams commonly use compatible seam tapes, while TPO seams are heat-welded. They require different installation and repair products. Confirm the existing material before selecting a repair or replacement system.

Can a new membrane go over the old roof?

Sometimes a recover system is possible, but it needs a project-specific assessment. Existing layers, trapped moisture, deck condition, attachment, loading and applicable reroofing requirements all affect that decision. Do not assume an overlay is suitable simply because the top surface looks intact.

What maintenance does a rubber roof need?

Follow the system manufacturer’s care guidance. Arrange regular checks of the membrane, flashings and drainage, and report new leaks or storm damage. Roof access and repairs should be handled by qualified people. Discuss ongoing care through our roof maintenance service.

Can ordinary roof cement repair EPDM?

Use repair materials approved for the identified roof system. Asphaltic roof cement and some petroleum-containing products can damage EPDM. Share any previous repair history and warranty documents when requesting service so compatibility and coverage can be considered.

Tell us what is happening with your flat roof

Share the roof location, any known material details and when the problem appears. Contact Supreme Roofing & Exterior for a free consultation and quote, or email info@supremeexterior.com.